Powerful, Compact Cleaning System

The powerful cleaning system is comprised of four key components: highly efficient air conveyance system, highly productive sweep system, superior water system for dust suppression, efficient debris containment and dump system.

Engine Enclosure

With superior insulation and convenient full wing doors, the engine enclosure reduces in-cab and drive-by noise levels while protecting the engine.  When opened, all components for maintenance checks and daily service are freely accessed.  Most service items such as the fuel pump, oil dipstick, radiator and electrical components can be checked from the ground level without raising the hopper.

Pick-Up Head

The 80 in (2,032 mm), regenerative air, steel pick-up head is spring-balanced, has heavy-duty, replaceable rubber curtains and is hydraulically controlled from in-cab for long life and reliable performance.  Sweeping is possible in forward or reverse if the application requires the 10 in (254 mm) diameter, sturdy, steel-wire reinforced rubber suction hose accepts bulky debris and features quick-disconnect for inspection and maintenance.  Hoses can be easily rotated for extended life.

Dust Separator

The built-in centrifugal dust seperator positioned at the air-return outlet of the hopper features a self-opening, abrasion-resistant steel door, which allows the debris to be easily discharged during dumping.

Front Spray Bar

Cab controlled water spray bar helps settle debris under extremely dusty conditions.

LifeLiner® Hopper System

The LifeLiner® hopper system greatly improves the life, durability, and functionality of the sweeper.

Additional Water Tank

Add an additional water tank to the Crosswind for a total water capacity of 280 gallons.

Broom Inside Suction Head

This broom assists with centering debris under the suction head for disposal into the hopper.

Catchbasin cleaner

A catchbasin system provides a powerful and efficient option for catchbasin cleaning.

PM10 Water System

Highly efficient dust control system passes California's fugitive dust control standards (Rule 1186, PM10).

Side Broom Tilt Controls

Gives the operator greater control over the side broom(s).