GT18 Hydraulic Power Units
GT18 Power Units are small and compact featuring a single 5 or 8 gpm (20 or 30 lpm) tool circuit.
FEATURES
- Designed to meet HTMA standards.
- Briggs Vanguard or Honda OHV engines.
- Air-to-oil cooler with high-speed blower.
- Automatic throttling when tool is engaged.
- HTMA quick disconnect couplers standard.
- Lift and latch handle.
- Sealed, non-spillable, no maintenance battery
- 12 inch Foam filled tires.
- Low oil pressure shutoff.
- In-tank hydraulic filter.
- Electric start and all-electric controls.
- 110 vac on some models.
- 12 vdc plug on some models.
- Hose basket (included on some models optional on other models)
To obtain a product data sheet on any of the models in Adobe® Acrobat® Reader® format, click here: [GT18 Hydraulic Power Units].
NOTE: Adobe® Acrobat® Reader® is required and can be obtained from the Adobe® website free of charge.
SPECIFICATIONS
| Model | Weight (wet) | Length | Width | Height | Output | Engine | 110 vac/12 vdc | Auto Throttle | Hose Basket |
| Accessory Plug | |||||||||
| GT18B02 | 330 lb / 150 kg | 35 in. / 90 cm | 21.5 in. /54.6 cm | 29 in. / 74 cm | 5 or 8 gpm / 20 or 30 lpm | Briggs | Optional* | Yes | Optional |
| GT18B03 | 330 lb / 150 kg | 35 in. / 90 cm | 21.5 in. /54.6 cm | 29 in. / 74 cm | 5 or 8 gpm / 20 or 30 lpm | Briggs | 110vac | Yes | Optional |
| GT18B05 | 330 lb / 150 kg | 35 in. / 90 cm | 21.5 in. /54.6 cm | 29 in. / 74 cm | 5 or 8 gpm / 20 or 30 lpm | Briggs | 110vac/12vdc | Yes | Optional |
| GT18H02 | 330 lb / 150 kg | 35 in. / 90 cm | 21.5 in. /54.6 cm | 29 in. / 74 cm | 5 or 8 gpm / 20 or 30 lpm | Honda | Optional* | Yes | Optional |
GTR20
The GTR20 is a small compact hydraulic power unit designed to provide power for hydraulic tools requiring 5 gpm/20 lpm up to 10 gpm/40 lpm. The GTR20 is powered by a choice of Briggs & Stratton or Honda industrial grade engines. Folding and locking handle, electric start, computer throttle control, pressurized engine lubrication, and large pneumatic tires are standard equipment.
SPECIFICATIONS
For more detailed information, click here [GTR Data Sheet].
| Weight (wet) | Length | Width | Height | Pressure | Flow Range |
| 330 lbs / 150 kg | 35 in. / 89 cm | 21.5 in / 54.6 cm | 29 in / 73.7 cm | 2000 psi / 140 bar | 5-10 gpm / 20-40lpm |
HP08
The HP08 is a light weight hydraulic power unit for operating hydraulic tools requiring 5 gpm/19 lpm. The HP08 is powered by a 9 hp Honda engine and comes with fold-down handle, hard rubber tires, recoil pull start, low engine oil shut-off, and automatic throttle.
SPECIFICATIONS
For more detailed information, click here [HP08 Data Sheet].
| Weight | Length | Width | Height | Pressure | Flow Range |
| 133 lbs / 60 kg | 28 in. / 71 cm | 18.5 in / 47 cm | 21 in / 53.5 cm | 2000 psi / 140 bar | 5 gpm / 19 lpm |
HPR Hydraulic Power Units
HPR Power Units are small and compact and feature either one 5 or 10 gpm (20 or 38 lpm) tool circuit or a twin 5 gpm (20 lpm) tool circuit combinable to a single 10 gpm (38 lpm) circuit.
FEATURES
- Designed to meet HTMA standards.
- Briggs Vanguard or Honda OHV engines.
- Air-to-oil cooler with high-speed blower.
- Automatic throttling when tool is engaged.
- HTMA quick disconnect couplers standard.
- Wheel barrow and side handles.
- 12 inch Foam filled tires.
- Low oil pressure shutoff.
- In-tank type hydraulic filter.
- Electric start.
- Hose basket.
To obtain a product data sheet on any of the models in Adobe® Acrobat® Reader® format, click here: [HPR Compact Data Sheet].
NOTE: Adobe® Acrobat® Reader® is required and can be obtained from the Adobe® website free of charge.
SPECIFICATIONS
| Model | Weight | Length | Width | Height | Output | Engine | Wheels & Handles | Auto Throttle | Hose Basket |
| HPR10293 | 286 lb /130 kg | 35 in. / 90 cm | 23 in. / 59 cm | 29 in. / 74 cm | 5 or 10gpm / 20 or 38 lpm | Briggs | Yes | No | Optional |
| HPR20260 | 271 lb /123 kg | 35 in. / 90 cm | 23 in. / 59 cm | 23.5 in. / 60 cm | 52x5 gpm / 2x20 lpm* | Honda | No | No | Optional |
| HPR20261 | 286 lb /130 kg | 35 in. / 90 cm | 23 in. / 59 cm | 29 in. / 74 cm | 2x5 gpm / 2x20 lpm* | Honda | Yes | No | Optional |
| HPR20290 | 261 lb /118 kg | 35 in. / 90 cm | 23 in. / 59 cm | 23.5 in. / 60 cm | 5 or 10gpm / 20 or 38 lpm | Briggs | No | No | Optional |
| HPR20294 | 286 lb /130 kg | 35 in. / 90 cm | 23 in. / 59 cm | 29 in. / 74 cm | 2x5 gpm / 2x20 lpm* | Briggs | Yes | Yes | Optional |
| HPR2029401† | 286 lb /130 kg | 35 in. / 90 cm | 23 in. / 59 cm | 29 in. / 74 cm | 2x5 gpm / 2x20 lpm* | Briggs | Yes | Yes | Optional |
HV18 Hydraulic Converter
The HV18 Hydraulic Converter is a portable hydraulic system that gets its power from the hydraulic system of a skidsteer loader, backhoe or any hydraulic source that can produce a minimum of 13 gpm (49 lpm) @ 2000-3000 psi (138-206 bar). The Converter then provides controlled and clean power to the tool with oil cooling. The HV18 Converter contains some of the hardware and design features of our "state-of-the-art" power units without the engine.
FEATURES
- Designed to meet HTMA standards.
- Air-to-oil cooler with high-speed blower.
- HTMA quick disconnect couplers standard.
- Hydraulic reservoir for tool operation.
- In-tank hydraulic filter.
- Carry type frame.
To obtain a product data sheet on any of the models in Adobe® Acrobat® Reader® format, click here: [HV18 Hydraulic Converter Data Sheet].
NOTE: Adobe® Acrobat® Reader® is required and can be obtained from the Adobe® website free of charge.
SPECIFICATIONS
| Model | Weight | Length | Width | Height | Required Inout | Output |
| HV18300 | 100 lb /45 kg | 21 in. / 53 cm | 19 in. / 48 cm | 20 in. / 51 cm | 16-35 gpm / 60-132 lpm | 8 gpm / 30 lpm |
| HP18294 | 100 lb /45 kg | 21 in. / 53 cm | 19 in. / 48 cm | 20 in. / 51 cm | 13-25 gpm / 49-95 lpm | 8 gpm / 30 lpm |
TracHorse
Completely redesigned for 2008. More information coming soon!
Street Sweepers