Models RD11/RD12/ID07/DL07
RD11 Rail Drill
FEATURES
- Automatic bit feed
- Pressurized cooling system
- Provides for drilling in heel blocks, guard rails and joint bars
- Double ended bits available
- Templates available
SPECIFICATIONS
For more detailed information, click here [RD11 Data Sheet].
| Weight | Length | Width | Hydraulic Pressure | Flow Range | Capacity |
| 93 lbs / 42 kg | 34 in. / 86.4 cm | 10.5 in / 26.7 cm | 2000 psi / 140 bar | 5 or 10 gpm / 20 or 38 lpm | 1 to 1-9/16 in dia./22 to 36 mm dia |
RD12 Rail Drill
The model RD12 rail drill uses exclusive indexable carbide tipped bits to provide the lowest cost per hole available on the market.
FEATURES
- Lightweight aluminum design
- Over-center clamp
- Automatic bit feed
- Indexable carbide tipped bits available
- Templates available
- Pressurized water system
SPECIFICATIONS
For more detailed information, click here [RD12 Data Sheet].
| Weight | Length | Width | Hydraulic Pressure | Flow Range | Capacity |
| 58.5 lbs / 26.5 kg | 28 in. / 71 cm | 8 in / 20.3 cm | 2000 psi / 140 bar | 8-10 gpm /30-38 lpm | 1 to 1-9/16 in dia./22 to 36 mm dia |
ID07 Impact Drill/Wrench
FEATURES
- Large trigger
- Swing-hammer mechanism
- Feathering ON/OFF
- 7/16 quick change chuck or 1/2 inch square drive
- Reverse
- Built-in reverse check
SPECIFICATIONS
For more detailed information, click here [ID07 Data Sheet].
| Weight | Length | Width | Hydraulic Pressure | Flow Range | Torque |
| 7 lbs / 3.3 kg | 8.5 in. / 21.6 cm | 4.5 in / 11.4 cm | 1000-2000 psi / 70-140 bar | 4 - 12 gpm / 15 - 45 lpm | 500 ft lb / 675 Nm |
DL07 Drill
FEATURES
- Large trigger
- Swing-hammer mechanism
- Feathering ON/OFF
- 7/16 quick change chuck or 1/2 inch square drive
- Reverse
- Built-in reverse check
SPECIFICATIONS
For more detailed information, click here [DL07 Data Sheet].
| Weight | Length | Width | Hydraulic Pressure | Flow Range | Torque |
| 6 lbs / 2.7 kg | 9 in. / 23 cm | 4.5 in / 11.4 cm | 1000-2000 psi / 70-140 bar | 4 - 12 gpm / 15 - 45 lpm | up to 1250 @ 10 gpm/38 lpm |
Street Sweepers